| 1. | The value of fire-resistive furnishing in decreasing the number of ignition points was also demonstrated in the tests .
在试验中也进行了关于不怕火的室内装饰物以对降低起火点作用的试验。 |
| 2. | Ip ignition point
燃点,着火点,发火点 |
| 3. | The most important appears to be what has been called the " density of ignition points "
最重要的似乎是所谓“起火点的密度” 。 |
| 4. | It is discovered that mischmetal can heighten the ignition point of zm5 alloy obviously
实验发现，混合稀土能明显提高zm5镁合金的起燃温度。 |
| 5. | The addition of 0 . 12 wt % mischmetal has the best result , which heightens the ignition point by 149
当混合稀土加入量为0 . 12 %时，阻燃效果最好，提高起燃温度达到149 。 |
| 6. | Operating instructions : use the upper right - hand corner of each screen is the pipeline , the water hydrants connected to the ignition point fire
操作指南：使用画面右上角每次所给出的管道，将消防栓的水流连接到着火点灭火吧 |
| 7. | The program is the same with onan and onaf . the temperature rise of high ignition point oil transformer also use the program . some factors are analysed to influence temperature rise of transformer
该算法适用于自然油循环变压器自然风冷却和吹风冷却的情况以及冷却流体为常规变压器油或高燃点油的情况。 |
| 8. | Units producing inflammable and explosive dangerous goods shall attach instruction book with datas such as the ignition point , flash point and explosion limit of the product , and give points of attention for fire and explosion prevention
生产易燃易爆危险物品的单位，对产品应当附有燃点、闪点、爆炸极限等数据的说明书，并且注明防火防爆注意事项。 |
| 9. | The calculation method using in factory has larger error and is n ' t used in high ignition point oil transformer . in this paper a calculation method , which has been verified by experiment results , is presented based on the fundamental theories and rule equation of heat transfer to calculate the temperature rise of average oil , top oil , coil , core and hot - point . a program has been compiled
本课题立足于工程实际应用，根据传热学基本原理和经典试验换热准则式，通过对变压器发热冷却原理进行分析和研究，提出了一套计算变压器平均油温升、顶油温升、绕组温升、铁芯温升和最热点温升的计算方法并编制了计算软件，对影响变压器温升的因素进行了分析。 |
